NEWS AND EVENTS
IEEE Aerospace and Electronic Systems Society (AESS) Student Chapter Inauguration
25th April 2026
The Department of Aerospace Engineering, Dayananda Sagar University, inaugurated the IEEE Aerospace and Electronic Systems Society (AESS) Student Chapter (SBC14026I) on 25 April 2026. The event was graced by Chief Guest Mr. Puneet Kumar Mishra and marked an important milestone in strengthening professional engagement, research orientation, and technical collaboration among students in the fields of aerospace and electronic systems. The chapter operates under the guidance of faculty mentors and student representatives, providing students with a platform for professional development and interaction with the wider aerospace community.
CelestAI’26 – Sky Rift
23-35th April 2026
The Department of Aerospace Engineering, in collaboration with the Departments of Electronics and Communication Engineering and Data Science, successfully organized the Dayananda Sagar University Tech Fest, CelestAI’26, from 23 to 25 April 2026. The Aerospace Engineering Department hosted a series of technical events under the banner “Sky Rift,” featuring competitions involving rovers, drones, and RC planes. The event attracted enthusiastic participation from students across various institutions in Karnataka and provided a vibrant platform for technical innovation, creativity, hands-on learning, interdisciplinary collaboration, and competitive spirit. The fest was inaugurated by distinguished dignitaries, including Prasanth Balakrishnan Nair and Rahul Sharanappa Sankanur.
One-Day Build, Test and Fly Drone Workshop
17th April 2026
The Department of Aerospace Engineering conducted a one-day workshop on “Build, Test and Fly Drone” for VI semester students on 17 April 2026. Led by Mr. K. Raghav, an alumnus of Dayananda Sagar University, the workshop provided students with hands-on experience in drone assembly, component integration, calibration, safety checks, flight control, troubleshooting, and controller tuning. The participants also explored flight dynamics, stable hovering, real-time piloting, and mission execution, giving them practical exposure to UAV systems and operations.
Guest Lecture on Aircraft Hangar Maintenance
15-16th April 2026
The Department of Aerospace Engineering, Dayananda Sagar University, organized a guest lecture on “Aircraft Hangar Maintenance” for VI semester Aerospace Engineering students. Mr. A. Srinivasa, Consultant at Genser Aerospace, provided valuable insights into hangar operations, scheduled and unscheduled maintenance, aircraft inspection procedures, maintenance documentation, regulatory compliance, FOD control, safety protocols, and quality assurance practices.
Expert Lecture on Computational Fluid Dynamics
15th April 2026
The Department, in association with the Aeronautical Society of India (AESI), organized an expert lecture titled “Computational Fluid Dynamics in Modern Aero Engine Design: Industrial Practices, Challenges, and Emerging Innovations.” The session provided students with practical insights into CFD applications in compressors, turbines, and combustion systems, while also introducing emerging technologies such as high-performance computing, digital twins, and AI-driven simulations.
Technical Interaction on Model Rocketry Competition
10th April 2026
The Department organized a technical interaction related to the IN-SPACe Model Rocketry Competition, providing students with an opportunity to strengthen their understanding of model rocketry and competition requirements. The activity complemented the department’s continuing initiatives in CanSat and rocketry and encouraged students to apply theoretical knowledge through practical aerospace projects.
Virtual Twin Enabled CubeSat Design & Development Workshop
3-5th April 2026
Faculty and students from the Department participated in the Dassault Systèmes Foundation workshop, “From Mission Goals to Hardware: The RFLP MBSE Approach for CubeSats,” held in Bengaluru. The programme focused on mission concept development, feasibility analysis, and system architecture formulation using advanced Model-Based Systems Engineering tools, particularly CATIA Magic on the 3DEXPERIENCE platform.
Vikram Sarabhai Space Centre Museum Visit
2nd April 2026
The Department organized an industrial visit to the Vikram Sarabhai Space Centre Museum for VI semester Aerospace Engineering students. The visit provided valuable exposure to sounding rockets, launch vehicles, propulsion systems, staging mechanisms, payload integration, mission planning, aerospace materials, and the evolution of India's space programme.
Ramanavami Celebration
28th March 2026
The Department of Aerospace Engineering organized a Ramanavami celebration as part of its efforts to promote cultural values and holistic student development. The event provided students and faculty with an opportunity to come together and celebrate the occasion, complementing the department’s strong emphasis on technical excellence with cultural and social engagement.
Expert Lecture on GD&T and Careers in Aerospace
27th March 2026
Industry experts Mr. Sasikumar and Mr. Aditya Shivaprakash from Airbus delivered an expert lecture on “Fundamentals of Geometrical Dimensioning & Tolerances and Careers in Aerospace Engineering.” The session highlighted the importance of GD&T in aerospace design and manufacturing while providing students with insights into industry expectations, career opportunities, and essential skills for aerospace professionals.
Industrial Visit to ISRO Satish Dhawan Space Centre
26th February 2026
IV semester Aerospace Engineering students visited ISRO's Satish Dhawan Space Centre (SDSC SHAR), Sriharikota, accompanied by faculty members from the department. The students gained valuable exposure to the Mission Control Centre, launch pad facilities, and other critical infrastructure, providing practical insights into launch vehicle operations, mission management, and large-scale space mission execution.
FLIGHT’26 Avionics Workshop
21st March 2026
Students from the Department of Aerospace Engineering participated in the Avionics Workshop conducted as part of FLIGHT’26, organized at the Madras Institute of Technology, Anna University. The workshop provided hands-on exposure to avionics systems and enhanced students’ understanding of aircraft instrumentation, communication, and control systems. The programme further strengthened experiential learning and skill development in emerging aerospace domains.
Expert Lecture on Model-Based Systems Engineering
25th February 2026
Mr. Vinay Paliya, MBSE Capability Leader, and Mr. Ganesh, Chief Engineer, from Quest Global conducted an expert session for II and III year students. The programme included a hands-on demonstration of CATIA Magic and discussions on surrogate models for Condition-Based Monitoring, providing students with practical exposure to MBSE methodologies and their applications in industry.
Academic–Industry Interaction with Tech Mahindra
17th February 2026
Dr. Mathew Chacko, Professor of Practice, and Dr. B. V. N. Ramakumar, Professor, Department of Aerospace Engineering, visited Tech Mahindra for an academic–industry interaction. Discussions focused on the MBSE and Aerospace Structures courses, curriculum alignment with industry requirements, and potential internship opportunities to strengthen students' practical exposure and industry integration.
MoU with Quest Global Engineering Services Pvt. Ltd.
28th January 2026
The Department of Aerospace Engineering, Dayananda Sagar University, signed a Memorandum of Understanding (MoU) with Quest Global Engineering Services Private Limited on 28 January 2026. The collaboration aims to strengthen industry–academia engagement in the areas of engineering education, research, and campus hiring. The MoU also envisages opportunities for joint programmes, student internships, and collaborative research projects, thereby providing students with greater exposure to industry practices and enhancing their professional and technical competencies.
Post-Mission Analysis Workshop – Model Rocketry and CANSAT
23-24th January 2026
The Department’s Model Rocketry and CANSAT teams participated in the Post-Mission Analysis (PMA) Workshop at BMSCE on 23 January 2026, followed by an Educators Cohort Meeting and valedictory programme at Dassault Systèmes, Jayanagar, on 24 January 2026. The activities provided students with an opportunity to analyse their project outcomes, strengthen their understanding of model rocketry and CANSAT systems, and interact with the wider academic and technical community.
Virtual Twin for Satellite Workshop
19-20th January 2026
Faculty members from the Department of Aerospace Engineering participated in the Virtual Twin for Satellite workshop organized by Dassault Systèmes La Foundation. The workshop provided insights into virtual twin technology and Model-Based Systems Engineering approaches for satellite design and lifecycle management, with participation from leading institutions including NITTE, Thapar University, and Manipal University.
CSIR-National Aerospace Laboratories (CSIR-NAL) Visit
14th October 2025
On 14/10/2025 Department of Aerospace Engineering at Dayananda Sagar University organised an industrial visit to CSIR-National Aerospace Laboratories (CSIR-NAL). The students from III and IV year witnessed Trisonic wind tunnel, Turbine blade testing, propulsion testing facility and Saras hangar.
Bhartiya Antriksh Hackathon
30th August 2025
As part of the National Space Day 2025 celebrations, the Bhartiya Antriksh Hackathon was organized on August 30. This event invited students from all disciplines to present futuristic ideas, with the unique opportunity for the winning team to fly their idea to space in upcoming Dayananda Sagar University Space Missions.
National Space Day Celebrations 2025
Dayananda Sagar University hosted the National Space Day Celebrations 2025 to commemorate India’s space achievements and inspire young minds. Dignitaries, faculty, researchers, and students attended the event, which featured inspiring addresses by eminent personalities from ISRO, including Mr. M. Venkata Rao and Mr. M. S. Srinivasan, who spoke on satellite development, innovation, and the future of space technologies.
Expert Lecture on Product Design and Development
25th August 2025
On August 25, the Department of Aerospace Engineering organized an expert lecture on “Product Design and Development” for 5th-semester students. Dr. Ashok Kaushal from Concordia University, Canada, delivered the lecture, covering systematic product innovation, conceptual design, prototyping, testing, and advanced engineering tools, with an emphasis on creativity, sustainability, and industry-oriented practices.
Strategic Meeting with Dassault Systèmes La Fondation
14th July 2025
On July 14, a strategic meeting was held at the Digital Twin Lab with Dassault Systèmes La Fondation to strengthen academic-industry collaboration. Discussions included the “Connect Next” Workshop, support for the Digital Twin Lab, global internships, curriculum enhancement, joint research, and start-up support, with Dr. Nagaraja S. R., Mr. Huzefa Salim, and Mr. Praveen Bhagoji participating.
Special Interest Group (SIG) on Space Technologies Meeting
20th June 2025
On June 20, the Special Interest Group (SIG) on Space Technologies at Dayananda Sagar University convened a strategic meeting to assess ongoing projects and define future research trajectories. Led by Dr. Prasanthakumar H.G., discussions covered infrastructure readiness, progress on CubeSat development and RF system integration, and active collaborations with ISRO, Ananth Technologies, Dhruva Aerospace, and emerging start-ups. The session also emphasized expanding research into AI-driven satellite systems, space robotics, autonomous UAVs, and orbital solar power harvesting.
Industry Experts & Curriculum Recommendations
23rd May 2025
As part of the Industry Conclave 2025, the Department of Aerospace and Mechanical Engineering had the privilege of engaging with two esteemed industry experts—Mr. Praveen Valiyaparambil, Senior Manager – Quality at Collins Aerospace, and Mr. Gopi Krishna Kumar Gopalasamy, Engineering Group Manager – Infotainment at Tata Consultancy Services. With over 18 and 26 years of experience respectively, both experts shared invaluable insights into bridging academic training with real-world aerospace and automotive industry demands.
They recommended integrating standards and processes such as QMS, FAI, PAPA, APQA, and stress analysis into the curriculum. Emphasis was placed on aerospace certification standards including AS 9100, DO-178, DO-254, ARP4754, DO-160, and regulatory frameworks from FAA and EASA. Suggestions also included enhancing coursework in safety practices, risk management, and embedded systems (Embedded C, model-based development).
From a mechanical perspective, the importance of NVH, structures, vibration, and automotive testing was highlighted. They appreciated the Thermodynamics and Heat Transfer course for its relevance to public sector roles and recommended including modules on CAD/CAM, simulation-based case studies, and Software on Wheels to strengthen design and hands-on engineering capabilities. DevOps was also suggested for exposure to modern automated workflows.
AEROEXPO 2025
24th May 2025
On 24th May 2025, the Department of Aerospace Engineering at Dayananda Sagar University successfully organized a Project Exhibition titled “AeroExpo 2025.” The event showcased the innovative capabilities of undergraduate students, with over 60 participants presenting a total of 18 projects spanning key areas within the aerospace domain, including aircraft design, propulsion systems, UAV technologies, and space applications.
The exhibition was evaluated by Mr. Sandesh Naik, Divisional Senior Manager at Cyient Ltd., Bengaluru, who served as the external judge. His industry insights added significant value to the technical evaluation process. The event concluded with the announcement of the Best Project of the Academic Year 2024–25, celebrating outstanding innovation, technical depth, and practical relevance. AeroExpo 2025 provided a dynamic platform for students to demonstrate their engineering acumen, creativity, and problem-solving skills, fostering an environment of applied learning and academic excellence.
National Space Day 2024
23rd August 2024
The National Space Day celebration at Dayananda Sagar University, Harohalli, Karnataka, was a remarkable event with 50 enthusiastic participants, all gathered to honor India's illustrious space journey under the theme "Touching Lives While Touching the Moon: India’s Space Saga." The event featured distinguished guests, including Mr. N. Viswanatha, former Group Director of the Spacecraft Mechanisms Group at UR Rao Satellite Centre, ISRO, who delivered an insightful lecture. The celebration was marked by inspiring speeches, a tribute to the space industry's pioneers, and concluded with a heartfelt vote of thanks and the National Anthem, encapsulating the spirit of India’s achievements in space.
2 Days Pan India Competition on Cansat and Drone applications organised by Centre for space Science & technology & Department of Aerospace Engineering
2nd May 2024
The Drone and CanSat event, held on 2nd and 3rd May, 2024, commenced with a grand inaugural ceremony, highlighted by the auspicious lighting of the lamp by esteemed chief guest, Dr. S. Rangarajan. This ceremonial beginning was complemented by a melodious inaugural song performed by talented artists, Srilaxmi and Khushika. Dr. Gopal Sharma R. Joshi, Prof. V. V. Srinivasan and Dr. V. K. Hariharan bestowed upon chief guest a prestigious golden shawl, marking a moment of honor and recognition.Following this, Dr. V. K. Hariharan provided a comprehensive briefing on the competition, setting the stage for the proceedings.
Dr. Nagaraja S. R, Dr. Udaya Kumar Reddy, and Dr. S. Rangarajan delivered insightful addresses, enriching the gathering with their expertise. The inaugural segment culminated with a gracious vote of thanks delivered by Dr. Prashanthakumar H. G.Subsequently, the competition commenced with the welcoming of the judges and the enthusiastic participation of the teams. Each team presented their projects, receiving invaluable feedback from the judges. Armed with a clear understanding of the evaluation criteria, participants demonstrated their CanSat projects, sharing their data readings with the judging panel. The day concluded with a sense of anticipation and excitement, as participants looked forward to the ongoing collaboration and exploration that lay ahead
Parents - Faculty Meet on 10/12/2022
10th December 2022
The Department of Aerospace Engineering organised parent faculty meet on 10/12/2022.An interaction session with parents and faculties in order to discuss about the performance, discipline of their respective son/daughter.
The chairman from the department explained about the placements, laboratories, club activities and the teaching method followed by the department to enrich and promote students learning abilities. The response from parents was overwhelming and the session went for 3 hours and parents were asked to fill the feedback forms at the end of the meeting.
Donations from the department
14th November 2022
On 14th Nov 2022 on the occasion of Children's day department of aerospace engineering and Rotaract HSR offered donations to orphanage students near Augodi police quarters Boys hostel near Koramangala Bangalore. The Department faculties and students fulfilled the hostel requirement for a day by providing provisional items like rice bag, flour and other things which includes books and other stationary requirements.
A special thanks to Mr.Ankush from Rotaract HSR, Rutuja, Sufiya from V semester, our beloved chairman Dr.BVN Raman kumar, Prof. Sripad, Prof Kartik, Mr.Harish KL, student coordinators: Shreenidhi, Rohith, Sunil, Shankar ,David and ganesh from 7th semester and Nischal,Suchith from V semester for their execution for the completion of this event.
Hackathon organised by Dept. of Aerospace Engg, Alatus club on 16-17 Nov 2022,powered by Autodesk
23rd November 2022
Dayananda Sagar University, School of Engineering, Department of Aerospace Engineering, organized a Design Hackathon powered by Autodesk on November 16–17, 2022. A hackathon is an event where students are engaged in collaborative engineering activities over a short period of time. In this regard, various colleges from different disciplines enrolled for this hackathon, which included MS Ramaiah University of Applied Sciences (MSRUAS), BMS College of Engineering (BMSCE), Dayananda Sagar College of Engineering, Nitte Meenakshi Institute of Technology (NMIT), Nettur Technical Training Foundation (NTTF), the Oxford College of Engineering, and Dayananda Sagar University.
The problem statement was “Bio-inspired mechanical pickup device for airborne vehicle,” and the participants were expected to design their own prototype and carry out simulation using Autodesk Fusion 360 software. Around 70 teams registered from different colleges and DSU, out of which 65 teams, each consisting of a minimum of 1 participant and at most 3 participants, competed with each other for the given problem statement, after which a preliminary shortlisting of teams was conducted and 15 teams out of a total of 65, were selected for final presentation. These 15 teams presented their designs to the judges, and the top 3 teams were announced as the winners along with consolation prizes.
The members are Mr. Jason Joseph D’Silva and Nischay BK. The second prize was bagged by A. U. Nachiketh, Ruturaj Jadhav, and Alqma Khatib from MS Ramaiah University of Applied Sciences (MSRUAS). The third prize was awarded to Vivek Vijayan, Ujjual Rajeev, and Nithath C from Nettur Technical Training Foundation (NTTF)
ISRO SHAR VISIT
23rd November 2022
The Department of Aerospace Engineering organized an industrial visit to ISRO Sriharikota on 23/11/2022 on the occasion LMV 3 (Launch Vehicle Mark-3) previously referred as (GSLVMk3) spacecraft launch at 12:07AM on 23/10/22.In this regard the students from Final year and pre final year actively participated in this event, Prof Kartik S Tandel, Prof Sripad Kulkarni S, Mr.Harish KL accompanied the students and made the visit successful.
This ISRO shar visit was arranged from the department to have glimpses on the spacecraft launch. This was the very first event held in the department which involved a one day trip to Sriharikota representing Dayananda Sagar University.
The students witnessed the proper launch and how the spacecraft reached orbit. It was a nice experience and students got a feel how the space technologies played a prominent role and the effectiveness in the successful launch.
Space Week Celebrations
4th to 10th October 2022
The Alatus club from Department of Aerospace Engineering organized a celebration for the World Space Week on the theme of “Space and Sustainability” from October 4th to 10th, 2022. In order to create awareness and excitement among students and faculties each day of the week was dedicated to different topic related to theme. The first day was dedicated on the reason behind celebration of space week, day two was more inclined to the first human made earth satellite Sputnik 1, day three was all about evolution in space and different kinds of space missions, day four was a discussion on all the space agencies, day five gave an allusion about trends in space technology whereas, days six and seven were completely dedicated to sustainability, explorations and future career in space. The Alatus club also organized fun events including Origami competition, Rocket modelling, Poster making, Quiz and Treasure hunt during the week in which the students actively participated.
Apart from all the events that took place there was a main attraction for the space week, The Space Planetarium, it was dome shaped which was built by the students using recycled materials. A half dome mirror and projector were used to showcase a video about space overview involving solar systems and different kinds of constellations. All students and faculties of all the departments were invited to be a part of the space week celebration and it was a huge success due to the constant support given by all faculties especially Prof. Sripad Kulkarni S and Prof. Kartik who helped the students from the Alatus club for the smooth conduction of the event.
FRESHER’S WELCOME 2018-19
6th August 2019
The Inaugural function of the Department of Aerospace Engineering began with a technical talk and Drone session in order to facilitate the interests of students. It was a talk given by two reputed guests Dr. S. Rajagopal an Outstanding Scientist of grade “G” and Project Director (Aircraft), Aeronautical Development Establishment, Bangalore and Mr. Shivakumar H G, Multiplex Drone Pvt. Ltd., Bangalore. The preliminary inaugural function featured the welcoming of the guests by Dr. B V N Ramakumar Chairman- Dept. of Aerospace Engineering followed by a short addressing by Dr. Shankapal S R Pro- Vice Chancellor, DSU.
Immediately after the inaugural event, the chief guest got to stand and expressed his journey in becoming the Project Director of the upcoming trends and developments of UAV, he also expressed the challenges faced by him and his team in building MALE (Mid Altitude Long Endurance) UAV with the prime testing area at Aravoo Kaval in Challakere Taluk of Chitradurga district. Challakere ATR is intended to conduct the trials of unmanned aerial vehicles (UAVs), air-to-ground weapons, parachutes, and aerostats. He took us on a journey, from the inception of MALE and HALE UAVs to its final test at Challakere test facility. The students were intrigued by the sheer amount of problems put forward by the orator that was faced by the team in building different kinds of UAV. Being a scientist from NAL, he gave an in-depth detail of the difference in design and modeling of various kinds of its type.
After an informative talk on UAV Dr. Srinivas, Dean Engineering, DSU took over and encouraged the students to participate in various activities and research. The guest of honor shared his knowledge and his ideas with the students on what made him to take up the challenge of building an agricultural drone with which he shaped up his career.
Mr. Shivakumar did his MSC in Mechanical Engineering from Linkoping University, Sweden. He gave cursory information of the different agricultural drones and its design aspects. He also gave an insight of what made him to shift his gears from being an Assistant Professor to the chief of operations and Technical aspects at Multiplex Drone pvt. Ltd. Followed by a tea break he show cased his skills by demonstrating his agricultural drone to the students. At the bottom line, he unravelled to the unquestioned story behind the building of an agricultural drone
WORKSHOP ON GLIDERS 2018-19
10th & 11th August 2019
A 2-day workshop was organized by the Department of Aerospace Engineering, DSU on Design and Fabrication of Gliders. The workshop was inaugurated on the 10th of August 2019 and followed up till the next day
The event started with a formal introduction on “ALATUS” (Aero club) by Dr. B V N Ramakumar, chairman – Aerospace Engineering, He then gave an insight of the activities to be conducted by the club which fascinated the students to join the participate in more events The workshop witnessed an esteemed guest Mr. Sashidar, Design Engineer, Quest Global to enrich the knowledge on flying machines.
The first day of the workshop kick-started by a technical session on basics of Aircrafts and other flying machines, where the lead took the students to an interesting journey on the history of aircrafts and the struggles faced during the early stages. He also spoke about the basic theory behind the flying natures of vehicles, where questions were triggered off both by gathering and the guest.
Later on, the same day students were asked to draw the basic drawings on the wing structure and other parts of gliders using aspect ratio and other parameters required for design which later modified on requirements. Over the guidance of the guest, students were able to design their gliders.
The 2nd day of the workshop saw the complete fabrication of gliders where the faculty members too joined the club to develop their own gliders. It all ended up on a flying note where all the gliders took off from its creators’ hands. Around 40 gliders made using balsa wood fought to prove its beauty in air out of which three bagged the prizes for best looking glider by Dishana of 3rd sem, best design by Yaseer Mohammed of 3rd sem and best performing glider by Tahi Bhutan of 1st sem were later facilitated by the Chairman -DSU.
TALK ON DRONES AND ITS APPLICATION
24th August 2019
An inspirational talk and demonstration on the journey of emerging areas of drones and its application was organized by ALATUS (Aerospace club, DSU) on 24th August 2019. A Total of around 60 students from all the departments of the college gathered hear it from the greats. Chairman -Aerospace Engineering introduced the guests to the students. The function was honoured by 4 dignitaries of different domains joined together by the flying beauty of drones.
It all then ignited by Mr. Sandesh, Navanidhi High Centrix 5 Pvt Ltd. With his self-introduction he took the whole crowd to visualize his own memories and the career he came through, inspired many. He shared his experiences on his associations with market leaders like Airbus, Mitsubishi, etc. With the time limitations he then started an interactive session with the students on drone technology, its aims and applications. He also briefed about his start up, its project conceptualization, and development. His experience during floods over the regions of Shivamoga made everyone to understand the importance of drones.
Later Mr. Nandish an Ex- Employee of (Mercedes, Audi, Mahindra) took the charge and lead the gathering towards the steep lean of automobile industries due to the introduction of Electrical Vehicles
Mr. Faiz Habeeb, Alumni DSI, Honeywell Technology Solutions Pvt. Ltd expressed his journey towards drone technology. He also intrigued the students on what made him to chose his passion, as well as he shared his joyous experience on his team’s participations of various competitions.
The most awaited moment was declared where three different drones were set in to action by the trained pilots Mr. Varun and Mr. Faiz Habeeb. Students and faculties of other departments actively involved in knowing about the flying nature.
PYRAMID VALLEY TRIP
12th October 2019
The Mission of the ALATUS (Aerospace club) is also to inspire, encourage and initiate at all times all forms of humanitarian activities so that environmental disaster and human suffering can be minimized and even prevented and thus contribute to creating more congenial climate for peace. Alatus conducted a one-day awareness camp on 12th October 2019 which addressed about the reimbursement by nature through plantation of trees and health benefits through yoga at Pyramid Valley for the students of Aerospace department
The samplings were provided by NAL where faculties and students actively participated in plantation activities from 10 am till noon, followed by a meditation class where students were detailed about the health benefits through meditation. Students and faculties meditated under Pyramid doom which lasted about 45 minutes.
Lunch was provided by the pyramid valley management, where the faculties contributed a sum of Rs 2000 towards Nitya Annadana seva.
PARENT – FACULTY MEET
26th October 2019
On 26th October 2019 Department of Aerospace Engineering organized a parent- faculty meet. Parents were invited for an interaction with the faculties in order to discuss about performance, activities, discipline of their respective son/daughter. The response from the parents was overwhelming, where the session took place around 4 hours.
Later the Chairman accompanied by other faculties explained about the various technologies and ICT methods followed by the department to enrich and promote the students learning abilities. Parents were also taken to different well-established laboratories where the students were asked to explain their parents about the same.
Parents were then asked to fill the Feedback forms towards the end of the meeting, where the same was then processed by the chairman.
REVIEW AND DISCUSSION OF LABS BY VTU COE
30th October 2019
Dr. Ramakumar, Charmian- Department of Aerospace Engineering, DSU invited a team of expertise panelling Dr. C D Balaji, Dr. Sudarshan Prasad, Dr. Badri Narayana and Mr. Natraj from VTU COE for discussion and review on course contents, delivery plan & delivery structure of various laboratories established at DSU on 30th October 2019.
Dr. Shankapal, Pro Vice Chancellor, DSU welcomed the experts and the explained the procedure followed by DSU in collaboration with DASULT systems and DCS. Brief introduction on department labs was delivered by the Chairman – AE. Team put forwarded their ideas on course contents and the necessary actions to be taken on the delivery plan for the same. Mr. Ravi representative of DCS elaborated his views on the labs to be established in the forthcoming semester.
The team post lunch visited the labs and expressed their comments on the various equipment at each laboratory they also shared their knowledge in their respective domains which provided a good insight on different experiments carried out.
DSU TALENT SEARCH
12th, 13th, 14th of November 2019
In accordance with DSU talent search program, Department of Aerospace Engineering organized three day (12th, 13th, 14th of November2019) technical and practical session on glider making and origami fun activities. Prof Surya Narayana welcomed the students of different grades (comprising 8th to 12th standards) from various schools and colleges in around Bengaluru. He later reformed his welcome note to an interesting journey of history of aircrafts. He also described the current scenario of development of aircraft industries in India.
Post lunch session was taken over by Prof Srinath Ramakrishnan, who expressed his views on biomimicking concepts through which the various technologies used in aircraft industries were explained to the students. The technical session was screened off with a short interactive session with the students. Prof Shuba Javagal later entertained the students with Origami activities, where students actively took part and made different models of aircraft.
On the second day students were asked to draw the basic drawings on the wing structure and other parts of gliders using aspect ratio and other parameters required for design which later modified on requirements. Under the guidance of the Prof Kartik S Tandel and Volunteers, students were able to design their gliders.
The 3rd day of the workshop saw the complete fabrication of gliders. It all ended up on flying note where all the gliders took off from its creators’ hands. Prizes and certificates were given to students who outspanned their opponents with their design capabilities.
PROJECT BASED LEARNING
16th November 2019
Project based learning activity was carried out by 3rd semester students under the guidance of Dr. Ramakumar as a part of their thermodynamics course work. Students grouped themselves in 4 per batch and actively developed their models based on the different aspects of Thermodynamics
The activity was held at RC club room of Aerospace Department on 16th November 2019. Models were then tested and evaluated based on the design and working aspects by the Chairman- Dept. of Aerospace Engineering. This provided the better insight on the course where the laws and theorem of thermodynamics were put in to the practical application.
TRENDS IN THE AERODYNAMIC TEST FACILITY BUSINESS
25th January 2020
ALATUS (The Aerospace club) organized a seminar on wind tunnel testing and its facilities delivered by the tunnel’s own man from Canada Dr. Gary Elfstrom” Vice President, Aiolos Engineering Corp, Toronto. Adjunct Prof. Ontario Tech University, Oshawa. Elfstrom obtained his PhD from Imperial College on a topic of hypersonic gun tunnel: commissioned. His post-doctoral fellowship focused on the areas of research UTSI Transonic blow down wind tunnel. During a long tenure of his career he designed and commissioned NRC Trisonic blow down wind tunnel, fee for service testing, test technique development, DSMA foreign users trained VTI (Serbia), Trisonic blow down wind tunnel, commissioned, users trained. He promoted himself to become an entrepreneur by Setting up the aero and thermal test business. He currently serves as a Mentor, guiding the students in real world vehicle aerodynamics.
Dr. Elfstrom shared his bundle of knowledge speaking about the need of aerospace, automotive and other wind tunnels. He shared his ideas behind the historical build-up, demise and resurgence of wind tunnels he also stressed out the impact of computational methods and need and use of wind tunnels. He gave a glimpse on the Wind Tunnel Business, Canadian Success StoryGenesis and DSMA Rebirth. Being the Co-founder of a company Aiolo, Dr. Gary opened up about the hurdles he came through on its way.
"IISC OPEN DAY VISIT
29TH FEBRAURY 2020
Open Day 2020 @ IISc, Bangalore on 29th Feb 2020
Aerospace Club and Department of Aerospace Engineering arranged a visit to IISc on 29th Feb to witness Open Day celebrations. A total of 50 members comprising students and faculty of DSU participated in this visit. Students got a unique opportunity to explore live experiments, demos, workshops, seminars, quiz programs, exhibitions and laboratories present in IISc. They got to know the some idea on latest research happening in various disciplines and engineering and also got opportunity to meet some distinguished professors and research scholars. Students got motivated with the experience and identified some projects which can be taken as their mini projects.
